What you need:
Used box (Medium size box)
Scissors
Piece of Cloth
PVA Glue
Brushes
Sewing Pin
Paper Cutter
Needle or Sewing Machine
Procedure:
1. Carefully cut off the lid of the box on all four sides. As a result, we should get a cardboard box.
2.Of the selected fabric prepare handles. To do this, cut out from it strips us the desired length and width.
3. Set box at the middle of a piece of fabric and draw out its perimeter with a pencil. At the bottom of the box spread PVA glue using the brush, glue it to the fabric, turn it over gently and smooth the fabric using your hand.
4. It is time to make the joints of fabric on the edges of the box. To do this, gently turn down the fabric and one layer of glue, which we plan to leave at the bottom.
5. While the glue under the fabric "grasped", we coat the sides and by bending the upper layer as shown in the photo, glue it on top of the lower one.
6. It is time to make the upper hand. To do this cut the fabric with the same length and at the same position of the cut in the box. Insert the handle that you made before, glue the edge of the handle. Note the clearance angles.
7. On the top of the glued edge cover it using the cardboard strips. This is done neatly, slits are on the outer side of the box .
8.to our additional reliability and box ready!
